Make sure to unplug the power cord before installing or removing the motherboard. Select Parallel Port address or disable Parallel Port. Second] Set the system to the time that you specify. The default is With respect to the contents of this manual, ASRock does not provide warranty of any kind, either expressed or implied, including but not limited to the implied warranties or conditions of merchantability or fitness for a particular purpose.

Uploader: Fejinn
Date Added: 12 October 2016
File Size: 68.2 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 42725
Price: Free* [*Free Regsitration Required]

Select Parallel Port address or disable Parallel Port.

This allows the user to set CPU host frequency manually. The following table lists the keys found in the legend bar with their corresponding functions. This field shows the status of the Supervisor Password.

No password has been set. If the hard disk was already formatted on an older system, BIOS Setup may detect incorrect parameters. Select mode for parallel port.

Whenever you uninstall any component, place it on a grounded antistatic pad or in the bag that comes with the component. Lwn automatic detection is successful, BIOS Setup automatically fills in the correct values for the remaining fields on this sub-menu.

If you already have a password, you must enter your current password first in order to create a new password. This is an interface for front panel audio cable that allows convenient connection and control of audio devices.


Asrock K7VT2 V2.01 Motherboard socket A 462 KT266A AGP 5x PCI LAN Sound USB IDE

Failure to do so may cause physical injuries to you and damages to motherboard components. Use asrodk to select Midi IRQ. Please make sure to disconnect power supply before adding or removing DIMMs or the system components. Although K7VT2 offers stepless control, it is not recommended to perform over clocking. However, this is not recommended unless you thoroughly knows the feature.

ASRock K7VT2 – motherboard – ATX – Socket A – KTA Overview – CNET

This automatically activates the Numeric Lock function after boot up. This loads the default values for all setup options. Before installing the expansion card, read the documentation of the expansion card asrck make necessary hardware settings for the card.

Refer to the drive documentation to determine the correct values. Thermal grease between the CPU and the heatsink is also needed to improve heat transfer. The default is Make sure to set the k7ft2 of the Primary IDE hard disk drives to active.

ASRock K7VT2 – motherboard – ATX – Socket A – KT266A

Please check if the CPU fan on the motherboard functions properly before you resume the system. Also, for proper operation, it is not recommended to use two different brands of the DIMMs at the same time.


Keep the screw for later use.

For proper installation, please kindly refer to the instruction manuals of vendors of CPU fan and heatsink. Replace the system cover. It refers to a section of the PCI memory address range used for graphics memory.

Enable or Disable IDE controllers. Cylinders This field configures the number of cylinders. When the menu appears, the hard disk drive field displays the size for the hard disk drive that you configured. Connect the fan cable to the connector matching the black wire to the ground pin.

Also remember to use a grounded wrist strap or touch a safety grounded object before you handle components. It allows user to manually enter the number of cylinders, heads, and sectors per track for the drive. The lever clicks on the side tab to indicate that it is locked. Before you install the motherboard, study the configuration of your chassis to ensure that the motherboard fits into it.